DICOM Tables


ENHANCED MR IMAGE MODULE ATTRIBUTES

Tag
Tag Name
Requirement
Description
(0028,0002) Samples per Pixel
1
Number of samples (planes) in this image. This value shall be 1.
(0028,0004) Photometric Interpretation
1
Specifies the intended interpretation of the pixel data. Enumerated Value: MONOCHROME2. See C.7.6.3.1.2 for definition of this term.
(0028,9099) Largest Monochrome Pixel Value
3
Largest value in the monochrome portion of any frame whose Pixel Presentation (0008,9205) in the Frame Content Macro has a value COLOR. Color values must be greater than the Largest Monochrome Pixel Value. See section C.8.13.2.1.2.1 for further explanation.
(0028,0100) Bits Allocated
1
Number of bits allocated for each pixel sample. Each sample shall have the same number of bits allocated. Enumerated Values: 8 and 16.
(0028,0101) Bits Stored
1
Number of bits stored for each pixel sample. Each sample shall have the same number of bits stored. Enumerated Values: 8, 12 and 16. See C.8.13.1.1.1 for specialization.
(0028,0102) High Bit
1
Most significant bit for pixel sample data. Each sample shall have the same high bit. Shall be one less than the value in Bits Stored (0028,0101).
(0018,0088) Spacing between Slices
3
Value of the prescribed spacing to be applied between the slices in a volume that is to be acquired. The spacing in mm is defined as the center-to-center distance of adjacent slices.
(0028,2110) Lossy Image Compression
1
Specifies whether an Image has undergone lossy compression. Enumerated Values: 00 = Image has NOT been subjected to lossy compression. 01 = Image has been subjected to lossy compression. See C.7.6.1.1.5 for further explanation.
(0028,2112) Lossy Image Compression Ratio
1C
Describes the approximate lossy compression ratio(s) that have been applied to this image. See C.7.6.1.1.5 for further explanation. May be multivalued if successive lossy compression steps have been applied. Note: For example, a compression ratio of 30:1 would be described in this Attribute with a single value of 30. Required if Lossy Images Compression (0028,2110) is “01”.
(0088,0200) Icon Image Sequence
3
This icon image is representative of the Image.